52V Ebike Battery

The 52V battery pack uses a 14S configuration vs. the 13S configuration which is used for the 48V e-bikes. The industry has settled on the 48V system which is an artifact of the 12V lead acid battery infrastructure. Modern e-bikes almost all use lithium-based battery packs and do not really need...

Product Details

Type

6-DZM-24

Characteristic Curve

Rated Voltage

12V

 image001.jpg

Rated Capacity (2hr)

24Ah

Reference Weight (Kg):

10

Length (mm):

175

Width (mm):

165

Height (mm):

125

Total Height (mm):

125

Capacity (25℃)

2hr

120min

Inner resistance (25℃)

Fully charged state

12mΩ

Battery capacity at different temperatures (2hr)

40℃

102%

image003.jpg 

25℃

100%

0℃

85%

-15℃

70%

Storage capacity (25℃)

Stored for 3 months

90%

Stored for 6 months

80%

Stored for 9 months

60%

Maximum short circuit current (25℃)

100A(5S)


The 52V battery pack uses a 14S configuration vs. the 13S configuration which is used for the 48V e-bikes. The industry has settled on the 48V system which is an artifact of the 12V lead acid battery infrastructure. Modern e-bikes almost all use lithium-based battery packs and do not really need to have voltages in the 12V increments. 


Most battery packs found on the market are designed for the 10S or 13S configuration. To achieve the 14S setup, we needed to design our own packs to properly accommodate the added cells. Additionally all of the other parts of the bike needed to be upgraded to handle the increased voltage and power. 


Another requirement for our design was that our 48V and 52V packs can be interchangeable and backwards compatible to avoid leaving customers stranded with obsolete e-bikes. All of our e-bikes produced now can take advantage of the 52V revolution. 


What is the difference between the 48V and 52V RipCurrent S? 

The ONLY difference between the bikes is the battery pack. The batteries are interchangeable and the controller is designed to properly handle both 48V and 52V pack voltages. 


Product introduction

◆ Using high quality alloy as grid material, creep-resistant, corrosion preventive, excellent conductivity, less gassing and low water loss rate;

◆ Long life active ingredient formula, and a strong ability to resist deep charging and discharging;

◆ Positive and negative, using paste structure, high specific energy and high current discharge performance;

◆ Using special superfine fiber of small aperture AGM partition and tight assembly process to avoid short circuit fault;


Hot Tags: 52v ebike battery, China, suppliers, manufacturers, factory, wholesale
Related Products
Inquiry

+86-572-6293365

No.42, Daxuan Road, Meishan Industrial Park, Changxing, Zhejiang, China.

Remark:

.

SUBMIT

.