48V 13AH Battery Pack for Motorcycle
48v 13ah Battery Pack For Motorcycle Features: ◆ Using high quality alloy as grid material，creep-resistant、corrosion preventive、excellent conductivity、less gassing and low water loss rate; ◆ Long life active ingredient formula, and a strong ability to resist deep charging and discharging; ◆ The...
Type | 6-DZM-13 | Characteristic Curve | |
Rated Voltage | 12V |
| |
Rated Capacity (2hr) | 13Ah | ||
Reference Weight (Kg): | 4.5 | ||
Length (mm): | 152 | ||
Width (mm): | 98 | ||
Height (mm): | 98 | ||
Total Height (mm): | 106 | ||
Capacity (25℃) | 2hr | 120min | |
Inner resistance (25℃) | Fully charged state | 12mΩ | |
Battery capacity at different temperatures (2hr) | 40℃ | 102% | |
25℃ | 100% | ||
0℃ | 85% | ||
-15℃ | 70% | ||
Storage capacity (25℃) | Stored for 3 months | 90% | |
Stored for 6 months | 80% | ||
Stored for 9 months | 60% | ||
Maximum short circuit current (25℃) | 100A(5S) | ||
48v 13ah Battery Pack For Motorcycle Features:
◆ Using high quality alloy as grid material，creep-resistant、corrosion preventive、excellent conductivity、less gassing and low water loss rate;
◆ Long life active ingredient formula, and a strong ability to resist deep charging and discharging;
◆ The electrolyte is made of high purity sulfuric acid and special additives, to ensure maximum performance of electrode and suppress short circuit and self discharge;
◆ Normal use without acid replenishment or water replenishing, free maintained; if influenced by working conditions that losing a lot of water, you can add distilled water to ensure the normal performance of the electric property;
◆ The features of gel battery: advanced sealing structure, no leakage, no case bulging, no electrolyte concentration stratification, strong charge acceptance ability, water loss less, strong ability of resisting to over charge and discharge capacity, strong ability of charge retention.
Lead-acid batteries, also known as lead storage batteries, can store a lot of charge and provide high current for short periods of time.
The basic design of lead-acid batteries has not changed significantly
Lead-acid batteries are capable of being recharged, which is important for their use in cars.
Discharging the stored energy relies on both the positive and negative plates becoming lead sulfate and the electrolyte losing much of its dissolved sulfuric acid.
